ENGINEERING TEST TOOLS – END OF LINE TESTERS, AND OTHER COMPONENT TEST SYSTEMS

Seat Testing
The end of line automotive seat testing system uses J1850 communication protocol to query the seat controller and operate the seat control systems to validate communication and functionality. End of Line seat testers can be made to support CAN, J1850 or any other vehicle communication buss protocol.

FPAS – Fuel Pressure Analysis System
The Fuel Pressure Analysis System is used in testing fuel rails for the automotive industry. FPAS is an automated Fuel Injector/Fuel rail assembly testing system. The system cycles through tests operating the injectors via a driver network and acquires Analog, and Dynamic data. FPAS includes real time functions that instantly display relevant parameters as well as post processing utilities that create meaningful reports allowing the user to analyze, and report problems quickly.

VHCT – Vehicle Horn Certification Test
The Vehicle Horn Certification Test System is required by several automotive manufacturers to test horns for acceptable durability and quality under harsh conditions. The VHCT system runs up to 24 horns concurrently through a test that consist of cherps, nominals, long duty, and sound evaluation cycles that are designed to fully evaluate the horn. The system controls and monitors temperature and humidity, changes sampling rates based on cycle type, and drives the horns via a driver network. Sound, temperature, voltage, and amperage are monitored for each horn allowing a group of horns to be certified for purchase and use if they pass the manufacturers test.

SST – In Vehicle Starting System Tester
The in vehicle Starting System Tester was designed to take the place of out dated strip chart recording systems typically used for extremely low temperature starting system testing. The system can be quickly installed using a pre-instrumented vehicle and carried in the vehicle by the test engineer. The system records data and windows the test conditions to obtain a properly run test, data, analysis, and report allowing a starting system to be tested and analyzed quickly in cold or hot environments.

Engineering Test Tools: 734-779-7877
Email: ETTSales@roushind.com

Engineering: 734-779-7861
Email: mevein@roushind.com

Customer Support: 734-779-7877
Email: ETTSupport@roushind.com
Online Support Tools: ETTOnlineSupport